On paper, a project for pumping might appear straightforward. Water must be pumped from one location to another. In reality the distance between these two points may be subject to changing rate of flow, elevation differences, solids, pressure requirements, storage capacity, controls, electrical equipment, access to maintenance and even site restrictions.
Image credit: romtecutilities.com
For Romtec Utilities, designing a pump station begins by defining those operating conditions rather than selecting equipment from a standard catalog. Then, the initial designs and budgetary requirements can be formulated according to what the project requires.
Start With One Question: What Are We Moving?
The engineering is immediately changed.
The flow of domestic sewage is subject to significant variations throughout the day. When gravity conveyance fails or is not sufficient an wastewater lift station is needed to move the wastewater. Engineers should therefore take into consideration the anticipated inflow and the conditions of peak, pumping capacity Wet-well behavior, discharge specifications, and how equipment will be maintained and operated.
Different challenges are presented by industrial water. Fluids that are oily, caustic or possess high temperatures or pressures might be required by a manufacturing or processing facility. Romtec Utilities creates industrial systems which are utilized in applications ranging from data centers to installations for oil and gas Food processing power generation, as well as pharmaceutical waste.
Rainfall may create a completely different operating cycle
Stormwater systems might be able to endure long periods of a lack of activities, only to face huge quantities during a hurricane.
A stormwater liftstation that is connected to an existing detention basin should in particular, function alongside the overall drainage plan of the site. The runoff enters the detention basin. The temporary storage is responsible for the immediate volume and the pumping system transports the collected water to a discharge point that is approved.
Romtec Utilities provided this solution for the creation of the Norco business park in California. The pumping system was needed to drain the detention basin and then discharge it into the stormwater system. The station was intended to function as a part of the drainage system for a particular development rather than an individual piece of equipment.
“Package” Doesn’t have to Be Off-the-Shelf
It is a popular misconception that a pumping device for packages is simply a set of predetermined elements.
In the instance of an engineered infrastructure, packaging could refer to the fact that all of the main components are integrated into one system. Pumps, valves, meters, controls, communications, structural elements, as well as other equipment are able to be selected based on the necessary duty requirements.
This method is especially beneficial in situations where a new system has to connect with existing infrastructure. In industrial plants and municipal structures, there’s not an infinite amount of space or perfect environment to install. The equipment could need to be adjusted around the existing pipe systems, structures electric system, as well as operating schedules.
The real consequences of capacity Planning
When facilities grow over the years, undersizing can be very costly.
Romtec Utilities supplied a sewer lift station at Portland International Airport for the PDX Next extension. The new station had to be designed to have twice the peak flow capacity when the airport was expanded.
This illustration illustrates an important engineering concept: Design conditions should not be limited to the amount of work a facility is able to be able to handle during an average afternoon. Engineers must also understand what happens when demand is at its highest.
The job isn’t finished when the equipment arrives
Calculations and drawings will eventually become an operating system. The coordination of installations and the documentation are important to long-term success.
Years after construction, the success of an engineered pumping system can be determined. If the flow increases, a major storm arrives or the equipment needs to be maintained the decisions made in the initial design process become evident.
Romtec Utilities blends these choices to provide a complete pumping solution for a particular project. It assists in turning equipment into infrastructure that is made specifically for the environment in which it will be employed.